Making the PERFECT Roast Beef in the Ninja Foodi is so easy and incredibly delicious!
Would you like to save this recipe?
I will email this recipe page to you, so you can come back to it later!
You know that perfect thin slice of medium rare roast beef that you pile high onto a crusty roll and maybe dip into some Au Jus and call it a French Dip? Or slather it with BBQ sauce and call it a BBQ Pit Beef sandwich? Or whip up some mashed potatoes and gravy and call it Sunday Dinner!
This post may contain affiliate links. If you make a purchase after clicking a link, I may earn a small commission. As an Amazon Affiliate, I earn from qualifying purchases.
That's what we are making today! Perfectly cooked Roast Beef in the Ninja Foodi! Before we get into the directions for this super easy Roast Beef in the Ninja Foodi, let's talk about the differences between this recipe and pot roast.
Differences between Roast Beef and Pot Roast
Roast Beef and pot roast are not the same thing and the differences are in the cuts of meat used, in the cooking method, and how we serve it.
Roast beef is used mostly for sandwiches, although it is pretty good piled up high next to mashed potatoes and green beans for Sunday's dinner, too.
Pot roast, like this Quick & Easy Pot Roast made in the Foodi, is also delicious for Sunday's dinner, but it doesn't slice like roast beef does. It makes a great pulled beef style sandwich, but not a deli roast beef style sandwich.
Roast Beef is usually roasted dry, meaning no liquid in the pot. Pot Roast on the other hand, usually uses a braising liquid.
You want fattier cuts of meat for a pot roast, those that come from the shoulder area of the cow work best. My favorite cut of meat for a pot roast is the chuck roast.
For roast beef, you want a cut that doesn't fall apart when sliced.
What are the best cuts of meat for a Roast Beef?
The best choice is the top round and that is what we are using in this recipe. Any cuts from the round will work, but the eye of round and the bottom round won't be as tender.
The round cuts come from the hindquarter of the cow and are considered tough cuts of meat. This muscle is worked hard and round cuts are very lean, yet flavorful cuts of meat.
The best way to serve them is medium rare and make sure you cut across the grain. If you don't cut across the grain, the meat will be tough. It is also important to slice very thin slices for the best flavor and texture.
I know, not everyone likes rare roast beef, so I will include suggested cooking times if you like your roast beef well done.
Cooking Times & Temps for Roast Beef in the Ninja Foodi
*all cooking times are based on a 3 pound top round roast -- adjust times according your size roast. These are estimates only. Please use a good quality meat (affiliate link)thermometer for accuracy.
** The FDA recommends cooking beef roasts to an internal temperature of 145° F/ 63° C. There is a great article on times, temps, meat safety and other information right HERE.
I like my roast beef:
- Rare: Cool red center. For rare roast beef, broil for 20 minutes and let sit in the hot pot with the Ninja Foodi turned off for about 20 minutes. The internal temperature should register about 125 F/ 52° C.
- Medium-Rare: Warm red center. For medium-rare roast beef, broil for 25 minutes and let sit in the hot pot, with the Ninja Foodi turned off, for 25 minutes. The internal temperature should register 135° F/ 57° C.
- Medium: Warm pink center. For medium roast beef, broil for for 30 minutes and let sit in the hot pot, with the Ninja Foodi turned off, for 30 minutes. The internal temperature should register 145° F/ 63° C.
- Medium Well: Slightly pink center. For medium-well roast beef, broil for 30 minutes, reduce heat to 300° and bake for 5-10 minutes. Let sit in hot pot, with the Ninja Foodi turned off, until internal temperature registers 150° F/ 66° C.
- Well Done: Little or no pink. For a well-done roast beef, broil for 30 minutes, reduce heat to 300° and bake for 10-15 minutes. Let sit in hot pot, with the Ninja Foodi turned off, until internal temperature registers 160°F/ 71° C.
If you are not cutting and serving your roast beef right away, remove from the Ninja Foodi at about 5 degrees below the desired temperature to allow for carry over cooking. Since the meat is hot when removed from the Ninja Food, it will continue to cook and usually the temp rises about 5 degrees in 10-15 minutes.
How to slice Roast Beef for best results
The way you slice your roast beef greatly affects the tenderness. The top round, bottom round, or eye of round roasts are lean meats that can be tough and chewy unless they are sliced thinly and against the grain.
Knowing which way the grain is going before you season and cook your roast is the best course of action, but no worries if you start to slice the roast and realize you aren't cutting against the grain.
It happens to all of us and I'm actually happy that it happened to me while filming the video, which you can see right here: Roast Beef in the Ninja Foodi
I thought I knew the direction of the grain, but realized after cutting several slices that I was cutting with the grain and not against the grain. If this happens to you, just turn the roast around and start cutting against the grain. There is a difference in the way your slices will look, so you can easily tell if you are slicing it correctly.
The thinner the slices, the more tender the roast beef will be. I have a very good meat slicer and it works perfectly, but unless you plan on slicing a lot of meat and cheese, the cost of a good slicer often isn't worth it.
Instead, invest in a good knife. The one I use the most is a (affiliate link)Chef's Knife from Pampered Chef. The model I have is on sale right now in the outlet (quantities are limited, so they might be sold out) and it is a good quality knife with a very reasonable price tag.
When you slice roast beef correctly, you will be slicing against the grain. This cuts through the fibers in the meat and makes it much easier to chew.
How to make the PERFECT Roast Beef in the Ninja Foodi
First, bring your roast to room temp. This will allow for even cooking and is the first step to a perfect roast beef in the Ninja Foodi.
Second, season the outside of the meat generously! You can use the rub I used or any seasonings you prefer. Simple salt and pepper work great, but be sure to use a sea salt or Kosher salt and a course ground pepper for best results.
Preheat the Ninja Foodi for 10 minutes on BROIL with the rack in the low position. You want to start cooking the meat right away and having the rack and the Foodi preheated really helps.
Broil the roast on the rack in the low position for 25 minutes. Leave the roast in the Ninja Foodi with the lid closed and the Ninja Foodi turned off for 20-25 minutes. See cooking suggestions above if you want your meat cooked differently than medium-rare.
Remove and let cool for about 10 minutes. Slice against the grain.
If you want to make an au jus, add ¾ cup of beef stock to the inner pot and sear/sauté on high. Scrape the brown bits off the bottom to incorporate with the stock.
Serve & Enjoy!
Perfect Roast Beef in the Ninja Foodi
Ingredients
- 3 pound Top Round Roast
Rub
- 2 tablespoon sea salt
- 2 tablespoon pepper coarsely ground
- 2 ½ teaspoon onion powder
- 2 ½ teaspoon garlic powder
Would you like to save this recipe?
I will email this recipe page to you, so you can come back to it later!
Instructions
- Allow your roast to come to room temp. This takes about 1 hour.
- Combine the rub ingredients and generously apply to the outside of the meat.
- Preheat the Ninja Foodi on Broil with the rack in the low position inside the inner pot for 10 minutes.
- Broil the roast beef on the rack in the low position for 25 minutes. Turn the Ninja Foodi off and keep the lid closed for 25 minutes. See notes if you want your meat cooked to a different temperature.
- Remove and allow to rest for 10 minutes. Slice thinly against the grain.
- Serve & Enjoy!
Notes
- Rare: Cool red center. For rare roast beef, broil for 20 minutes and let sit in the hot pot with the Ninja Foodi turned off for about 20 minutes. The internal temperature should register about 125 F/ 52° C.
- Medium-Rare: Warm red center. For medium-rare roast beef, broil for 25 minutes and let sit in the hot pot, with the Ninja Foodi turned off, for 25 minutes. The internal temperature should register 135° F/ 57° C.
- Medium: Warm pink center. For medium roast beef, broil for for 30 minutes and let sit in the hot pot, with the Ninja Foodi turned off, for 30 minutes. The internal temperature should register 145° F/ 63° C.
- Medium Well: Slightly pink center. For medium-well roast beef, broil for 30 minutes, reduce heat to 300° and bake for 5-10 minutes. Let sit in hot pot, with the Ninja Foodi turned off, until internal temperature registers 150° F/ 66° C.
- Well Done: Little or no pink. For a well-done roast beef, broil for 30 minutes, reduce heat to 300° and bake for 10-15 minutes. Let sit in hot pot, with the Ninja Foodi turned off, until internal temperature registers 160°F/ 71° C.
Nutrition
ABOUT THE RECIPE AUTHOR, LOUISE LONG
Louise is a full-time recipe creator and food blogger @ The Salted Pepper. She has over 30 years of experience with cooking and recipe development. She owned a restaurant for several years and was a full-time RN until retiring to blog full-time.
Louise has several very active Facebook groups that help people with the basics of cooking and getting the most out of the Ninja Foodi.
Ninja Foodi Fresh & Healthy Meals
Seeing the need for easy, delicious, and high quality recipes, she is focusing all of her efforts creating recipes specifically for the Ninja Foodi. Her recipes are easy for the home cook to follow and provide step-by-step instructions.
Louise is also a YouTube creator and you can find most of her recipes in video format on The Salted Pepper YouTube channel.
She is very responsive to messages and eager to help in any way she can.
Kay says
We bought my in laws a foodi for Christmas because I literally use it for EVERYTHING all because I found this amazing lady’s channel when I first got mine! Louise taught me how to use this amazing product and her recipes are amazing! She literally takes so much time and even creates videos that are so detailed!! Thank you, Louise for being so dedicated and SO helpful!!! You are the absolute best!! I tell all my friends about your channel and your helpful tips and guidance!! ❤️❤️
Louise says
Thank you so much! I'm so glad you are loving your Foodi!
LINDA says
I have a 5.3 lb roast that I would like to cook in my new Ninja Foodi XL OL701.
Is this too big for the Foodi? And if not what should I try for time? 30 minutes broil and 30 minutes on crisp?
Thank you in advance
Louise says
You would have to see if it fits because roasts are differently shaped. Make sure it sits with enough clearance from the heating coil. You can always use the probe and set it to the temp you want and then AC on 375F until it reaches the temp, remove it and let it rest. Set the temp at least 10 degrees lower than the serving temp you want to allow for carryover heat.
Linda says
Hello again, sorry but just one more question… so, the newest Foodi is done differently and has different buttons?
Seems like instead of broil and keep warm Ishould just AC on 375°F until it reaches temp and , remove and rest in aluminum foil?
I also may have to cook it today for tomorrow to be reheated..should I set the temp lower?
Thank you so much 😊
I just signed up for your course so that should help.
MERRY CHRISTMAS 🎁
Thanks again
Louise says
I would do it the same way in the New Foodi, no need to change anything. You can however, use the probe if you have that model and do it with air fry. I like the results the Broil and rest gives, but it's up to you. To reheat the next day, I would probably use steam and crisp or wrap in foil and reheat at a low temp. Bring it out of the fridge 2 hours before you want to serve it so your reheat time is as short as possible.
Sharon Harwood says
Hi there, I know you prefer top round roast, but I have a 2.3 lb sirloin tip roast that is thawed in the fridge. I want to cook it tonight in the ninja foodi. I guess what I want to know is if I still follow your directions and want it cooked to a medium roast, will it still work out or do you have other recommendations for me?
Louise says
If you want thinly sliced beef like roast beef, then I think you will be fine to use the sirloin tip and follow the cooking instructions in this recipe. Make sure to cut thinly across the grain for the best results. You could also try seasoning it and searing it and then PC on the rack with 1 cup of beef broth for about 5-10 minutes followed by a full natural release. I haven't tried it that way, so please let me know if you do!
Danielle says
Hi. I'm wondering about the thermometer. I have the new foodi with the smart lid. I have a probe thermometer that I use in my oven and grill it has a wire. Is that what you use? How does that work with the lids? I really want to try this but have no clue how to utilize a thermometer WHILE using my foodi. Thanks!
Louise says
The smart lid is designed a little different and I'm guessing you don't have the one with the built in probe, so although I have used my probe thermometer with the smart lid (that doesn't have the built in probe) it did pinch the cord and I'm not sure if this will affect how the thermometer works in the future. On the old lids, there is a little place where the cord can sit and not be pinched. It is possible to use a probe in the new Foodi while using some of the functions, but you will have to see if your cord can reach out of the pot without being pinched.
Brent says
The Ninja usually defaults to “keep warm” after a cooking cycle. Do you actually power it off for the rest period or leave it on “keep warm”?
Louise says
I leave it on because it won't do anything until the pot cools down below 160-170F anyway, so it won't affect anything.
Andy says
Hi Louise,
I have a 1.5lb piece of Topside to use, half the size of yours. Should I simply cut the cooking time in half?
Many thanks.
Louise says
That really depends on how you want it cooked. It's going to take at least 15 minutes to develop the crust on the outside, so I wouldn't cut that down more than that. Instead, use a thermometer right after the grill time is up and then you can judge how long it needs to sit in the hot pot. I'm guessing half the time for medium rare.
Andy says
I went for 15/15 and got a good medium rare.
Thanks for advice.
Andy says
Turned out great! Salt, pepper and mixed dry herbs for crust.
Looking forward to doing it again.
Thanks Louise.